ArmSoM SOM-3588M-LGA

Introduction

The ArmSoM SOM-3588M-LGA core board uses the Rockchip RK3588M flagship chip,integrating a 6Tops NPU and a high-performance quad-core Mali-G610 MP4 GPU. It adopts LGA 506pin package method, which can expand a variety of display interfaces and industrial application interfaces. With open baseboard design materials and open-source SDKs, it can be efficiently developed. It supports multiple operating systems such as Android, Ubuntu, Debian, and Buildroot. It provides robust, stable, reliable, and expandable product support for various AI application scenarios, and is widely applicable to fields such as edge computing, artificial intelligence,cloud computing, VR/AR, blockchain, smart security, intelligent industrial control, and smart home.

Key Features

SOC: Rockchip RK3588M

CPU: Quad Cortex-A76@2.1GHz +Quad Cortex-A55@1.6GHz

GPU: ARM Mali-G610 MP4

NPU: 6Tops@INT8

RAM: 4GB/8GB/16GB（up to 32GB）64-bit LPDDR4/LPDDR4x，Defalut LPDDR4x 8GB

Flash: 16GB/32GB/64GB/128GB/256GB eMMC,Defaut eMMC 32GB ,support MicroSD card extend

Operating Systems: Android 12.0,Ubuntu 20.04,Ubuntu 22.04,Debian11,Buildroot,Armbian,Kylin OS

Interface Type: LGA

Size: 45mm×50mm×4.5mm

Hardware

SOM-3588M-LGA Module Hardware interface

SOM-3588M-LGA development Kit

Hardware spec

	SOM-3588M-LGA
SOC	Rockchip RK3588M
CPU	Quad Core Cortex-A76@2.1GHz +Quad Core Cortex-A55@1.6GHz, 8nm
GPU	ARM Mali-G610 MP4 GPU Support OpenGL ES3.2 / OpenCL 2.2 / Vulkan1.1
NPU	6 TOPS@INT8 Support INT4/INT8/INT16 mixed operation Support framework switching of TensorFlow/MXNet/PyTorch/Caffe
ISP	48-Megapixel ISP It implements a lot of algorithm accelerators, such as HDR, 3A, LSC, 3DNR, 2DNR, sharpening, dehaze, fisheye correction, gamma correction and so on.
Encode&Decode	Decode：8K@60fps H.265/VP9/AVS2,8K@30fps H.264 AVC/MVC, 4K@60fps AV1, 1080P@60fps MPEG-2/-1/VC-1/VP8 Encode：8K@30fps H.265 / H.264
RAM	4GB/8GB/16GB（up to 32GB）64-bit LPDDR4/LPDDR4x, Defalut LPDDR4x 8GB
Flash	16GB/32GB/64GB/128GB/256GB eMMC, support MicroSD card slot, Defaut eMMC 32GB
Operating Systems	Android 12.0, Ubuntu 20.04, Ubuntu 22.04, Debian11, Buildroot, Armbian, Kylin OS
Power supply	4.0V
Interface Type	LGA 506pin
Size	45mm×50mm×4.5mm(top: 2.2mm+PCB: 1.2mm +bottom: 1.1mm)
Weight
Operating temperature	-40℃ ~ 80℃ (The actual measurement can reach -40 degrees to 85 degrees)
Storage temperature	-40℃ ~ 80℃
Board layers	12 layers

Function parameter

Category	Function	quantity	parameter
Video Input Interface	MIPI DC(DPHY/CPHY) combo PHY	2	Support to use DPHY or CPHY Each MIPI DPHY V2.0, 4lanes, 4.5Gbps per lane Each MIPI CPHY V1.1, 3lanes, 2.5Gsps per lane	Support camera input combination: 2 MIPI DCPHY + 4 MIPI CSI DPHY(2 lanes) 2 MIPI DCPHY + 1 MIPI CSI DPHY(4 lanes) + 2 MIPI CSI DPHY(2 lanes) 2 MIPI DCPHY + 2 MIPI CSI DPHY(4 lanes)
	MIPI CSI DPHY	4	Each MIPI DPHY V1.2, 2lanes, 2.5Gbps per lane Support to combine 2 DPHY together to one 4lanes
	DVP	≤1	One 8/10/12/16-bit standard DVP interface, up to 150MHz input data Support BT.601/BT.656 and BT.1120 VI interface Support the polarity of pixel_clk, hsync, vsync configurable
	HDMI RX	1	HDMI 2.0 RX PHY, 4 lanes, no sideband channels Data rate support in HDMI 2.0 mode, 6Gbps down to 3.4Gbps Data rate support in HDMI 1.4 mode, 3.4Gbps down to 250Mbps Support HDCP2.3 and HDCP1.4
Display interface	HDMI/eDP TX interface	≤2	Support two HDMI/eDP TX combo interface, but HDMI and eDP can not work at the same time for each interface Support x1, x2 and x4 configuration for each interface Support up to 7680x4320@60Hz for HDMI TX, and 4K@60Hz for eDP Support HDCP2.3 for HDMI TX, and HDCP1.3 for eDP
	DP TX	2	Support 2 DP TX 1.4a interface which combo with USB3.1 Gen1 Support up to 7680x4320@30Hz Support Single Stream Transport(SST) Support HDCP2.3, HDCP 1.3
	MIPI DSI	2	Support 2 MIPI DPHY 2.0 or CPHY 1.1 interface Support 4 data lanes and 4.5Gbps maximum data rate per lane for DPHY Support 3 data trios and 2.0Gsps maximum data rate per trio for CPHY Support dual MIPI display: left-right mode, RGB(up to 10bit) format
	BT.1120 video output	≤1	Support up to 1920x1080@60Hz, RGB(up to 8bit) format Up to 150MHz data rate
Audio Interface	I2S	≤4	I2S0/I2S1, 8 channels TX and 8 channels RX path, audio resolution from 16bits to 32bits, Sample rate up to 192KHz I2S2/I2S3, 2 channels TX and 2 channels RX path, audio resolution from 16bits to 32bits, Sample rate up to 192KHz Support up to 7680x4320@60Hz for HDMI TX, and 4K@60Hz for eDP Support HDCP2.3 for HDMI TX, and HDCP1.3 for eDP
	SPDIF	≤2	Support two 16-bit audio data store together in one 32-bit wide location Support biphase format stereo audio data output
	PDM	≤2	Up to 8 channels, Audio resolution from 16bits to 24bits, Sample rate up to 192KHz Support PDM master receive mode
Network interface	GMAC	≤2	Support 10/100/1000-Mbps data transfer rates with the RGMII interfaces Support both full-duplex and half-duplex operation
Connectivity interface	SDIO	≤1	Compatible with SDIO3.0 protocol 4-bit data bus widths
	USB 2.0 Host	2	Compatible with USB 2.0 specification Supports high-speed(480Mbps), full-speed(12Mbps) and low-speed(1.5Mbps) mode
	SATA	≤3	Support three SATA3.0 controller, Combo PIPE PHYs with PCIe2.1/USB3.1, Compatible with Serial ATA 3.1 and AHCI revision 1.3.1	Combo PIPE PHY0 support one of the following interfaces SATA PCIe2.1 Combo PIPE PHY1 support one of the following interfaces SATA PCIe2.1 Combo PIPE PHY2 support one of the following interfaces SATA PCIe2.1 USB3.1 Gen1
	USB3.1 Gen1	≤3	Support USB3.1 Gen1,equal to USB3.2 Gen1 and USB3.0,up to 5Gbps datarate Embedded 2 USB3.1 OTG interfaces which combo with DP TX (USB3OTG_0 and USB3OTG_1) Embedded 1 USB3.1 Host interface which combo with Combo PIPE PHY2 (USB3OTG_2)
	PCIe2.1	≤3	Compatible with PCI Express Base Specification Revision 2.1 Support 5Gbps data rate
	PCIe3.0	≤4	Compatible with PCI Express Base Specification Revision 3.0 Support data rates: 2.5Gbps(PCIe1.1), 5Gbps(PCIe2.1), 8Gps(PCIe3.0) Support aggregation and bifurcation with 1x 4lanes, 2x 2lanes, 4x 1lanes and 1x 2lanes + 2x 1lanes
	SPI	≤5	Support two chip-select output Support serial-master and serial-slave mode, software-configurable
	I2C	≤9	Support 7bits and 10bits address mode Data on the I2C-bus can be transferred at rates of up to 100k bits/s in the Standard-mode, up to 400k bits/s in the Fast-mode
	UART	≤10	Embedded two 64-byte FIFO for TX and RX operation respectively Support 5bit, 6bit, 7bit, 8bit serial data transmit or receive Support auto flow control mode for all UART
	CAN	≤3	Support transmit or receive CAN standard frame, extended frame Support transmit or receive data frame, remote frame, overload frame, error frame and frame interval
Others interface	GPIO	Multiple	All of GPIOs can be used to generate interrupt Support configurable drive strength
	ADC	≤8	8 single-ended input channels, up to 1MS/s sampling rate
	PWM	≤16	Support 16 on-chip PWMs(PWM0~PWM15) with interrupt-based operation Optimized for IR application for PWM3, PWM7, PWM11, PWM15